Kenneth Robertson started KMR Electrical & HVAC Services with one goal — do the work right and treat every customer with respect. Since 2009, that has been the standard on every job, whether it is a furnace install in Allentown or an emergency refrigeration call in Bethlehem. Over 15 years in the field means the diagnostic process is sharper, the installs are cleaner, and the problems get solved faster. Experience in this trade is not something you can shortcut.
HVAC and electrical work both have one thing in common — the details matter every single time. A missed connection, an improper refrigerant charge, or wiring that is not run to code can cause real problems down the line. At KMR, every job gets the same level of attention whether it is a small repair or a full system installation. Customers across the Lehigh Valley keep coming back because the work holds up and the communication is always straight.
Our Team
HVAC & Electrical Technician / Owner
Kenneth has been working in the HVAC and electrical trade since 2009, building hands-on experience across residential and commercial properties throughout Allentown and the greater Lehigh Valley. He handles everything from heat pump installations and furnace replacements to new electrical wiring and refrigeration service. His approach is straightforward — show up, diagnose it correctly, and get the job done without unnecessary back-and-forth.

A proper HVAC installation makes a real difference in how your home performs year-round. Every system is sized and installed to match your specific space — not just dropped in and forgotten. Getting it right the first time saves you from costly repairs down the road. This is work that directly affects your comfort and your utility bill.

Heat pumps are one of the most efficient ways to heat and cool a home today. Whether you are replacing an aging unit or installing one for the first time, the work needs to be done precisely. A poorly installed heat pump runs harder, costs more, and fails sooner. This is a job that requires real hands-on experience to do correctly.

When your furnace goes out in the middle of a cold Pennsylvania winter, you need someone who can move fast and do the job right. New furnace installations are handled from start to finish — sizing, placement, connections, and testing. The goal is a system that runs clean, heats evenly, and lasts for years without constant issues.

If your system is running but not performing, something is off. Diagnosing HVAC problems takes more than just checking a thermostat — it requires reading the whole system. From refrigerant issues to electrical faults and airflow problems, the source of the issue gets identified before any repair recommendation is made.

A struggling AC unit usually gives warning signs before it quits completely. Catching those signs early keeps you from dealing with a full breakdown on the hottest day of the summer. Repairs are handled directly — no parts guessing, no unnecessary upsells. Regular maintenance keeps your system running at the level it was designed for.

Refrigeration systems are different from standard HVAC — they require specific knowledge to diagnose and repair correctly. Whether it is a commercial walk-in cooler or a residential unit, the work is handled with care. A failed refrigeration system can cause real losses fast, which is why this service is taken seriously from the first call.

New refrigeration installs require careful attention to line sets, refrigerant charge, and electrical connections. A system that is installed properly runs quietly, holds temperature, and does not cycle on and off constantly. Repairs are approached the same way — get to the real problem and fix it correctly the first time.

Running new wiring is detailed work that has to meet code and be done safely. Whether it is a new build, an addition, or an upgrade, every wire is run with purpose and precision. Cutting corners on electrical work creates hazards that are not always visible until it is too late. This work is done right from the start.

Older panels cannot always handle the load of a modern home or business. An upgraded panel keeps your electrical system safe and gives you the capacity you need. Panel work is handled cleanly and to code — no half-done upgrades, no skipped steps. If your panel is struggling, it is something worth addressing sooner rather than later.


⭐⭐⭐⭐⭐
You Reach Out, We Listen
When you contact KMR, the first priority is understanding exactly what is going on with your system. Whether you call about a furnace that stopped heating, an AC that is running but not cooling, or a new electrical install you need quoted, the goal is to get clear on the problem before anything else. No assumptions, no jumping to conclusions — just a straightforward conversation about what you are dealing with and what the next step looks like. That clarity sets the whole job up correctly from the start.
The Job Gets Assessed Properly
Once on-site, the system or project gets a full look before any recommendation is made. For HVAC calls, that means checking refrigerant levels, electrical connections, airflow, and controls — not just the obvious stuff. For electrical work, the scope gets mapped out cleanly so nothing is missed. A proper assessment in Allentown or anywhere across the Lehigh Valley means you get an honest answer about what is needed and what it will take to fix it right.
The Work Gets Completed, Not Just Started
Every job at KMR gets finished the way it was supposed to — completely, correctly, and without cutting corners. Systems get tested after installation or repair to confirm they are running the way they should. If something does not look right during the final check, it gets addressed before leaving the property. Customers in Bethlehem, Stroudsburg, and across the Lehigh Valley can expect a job that is done to a standard that actually holds up over time.
Ready to get started?
Yes, HVAC installation is one of the primary services offered in Allentown and throughout the Lehigh Valley. Every installation is sized to fit the specific property and completed to manufacturer and code standards. Kenneth has been handling installs since 2009, so this is not unfamiliar territory. Call (855) 691-1472 to schedule an estimate for your home or business.
Heat pump installation is available across the Lehigh Valley, including Allentown, Bethlehem, Emmaus, and surrounding areas. Heat pumps are one of the more technical installs in this trade — refrigerant handling, electrical connections, and airflow all have to be dialed in correctly. A poorly installed heat pump costs more to run and breaks down sooner. The job is done right from the start every time.
Yes, 24/7 emergency HVAC service is available in Allentown and the surrounding areas. If your heat goes out in January or your AC stops working on a hot summer day, you do not have to wait until the next business day. One call to (855) 691-1472 connects you directly. Emergency response is not a luxury add-on here — it is part of how KMR operates.
KMR serves Allentown, Bethlehem, Stroudsburg, East Stroudsburg, Easton, Emmaus, Whitehall, Nazareth, Macungie, and several other communities across the Lehigh Valley and Pocono region. If you are unsure whether your area is covered, a quick call to (855) 691-1472 will give you a direct answer. The service area has been built around where customers actually need help in this part of Pennsylvania.
Yes, KMR handles both HVAC and electrical work — which is a real advantage on jobs where the two overlap. New HVAC installs often require dedicated electrical circuits, panel work, or wiring that a separate electrician would otherwise have to come out for. Having one technician who is experienced in both trades saves time and reduces the back-and-forth between contractors. It keeps the job moving and the responsibility clear.
The answer depends on the age of the unit, the nature of the problem, and the cost of the repair relative to what a replacement would run. A furnace that is over 15 years old and requiring a major component replacement is usually not worth the investment. A diagnostic visit is the best way to get an honest answer — the issue gets assessed and you get a clear recommendation without pressure either way. Call (855) 691-1472 to set that up.
Yes, commercial and residential refrigeration service is available throughout the Lehigh Valley and Pocono areas. Commercial refrigeration is a specialized area of this trade, and it is handled with that understanding — not treated like a standard HVAC call. A failed cooler or refrigeration system can cause serious losses quickly, so response time and accuracy both matter. KMR takes refrigeration calls seriously for exactly that reason.
New electrical wiring installation is available for residential and commercial properties in Allentown and the surrounding Lehigh Valley. Whether it is a room addition, a new build, or a system upgrade, the wiring is run cleanly, safely, and to code. Electrical work done incorrectly creates hazards that are not always obvious until something goes wrong. Every job here is completed with that responsibility in mind.